Is Soft Water Slippery?

Busting Common Soft Water Myths

Myth #1: Water Softeners Make Your Water Taste Salty

Sometimes, when folks read “sodium,” they think “salt.” However, it’s important to remember that the element sodium (Na) is not the same as the compound that makes up table salt (NaCl). So while softened water contains higher levels of sodium than hard water, it does not contain higher levels of salt. Softened tap water will not taste salty and doesn’t pose any health risk to the average person. 

Water softeners use an ion-exchange process to remove excess minerals from your home’s water. This process works via resin beads inside the unit. These beads contain sodium ions. When resin beads are in hard water (water containing excess calcium and magnesium), they release sodium ions and bind with the calcium and magnesium ions. This produces soft water, or tap water free from excess minerals. 

If you do taste salt, it might be a sign that you’re having an issue with your system. Run a manual regeneration cycle or call a Wolverine Water technician for more help. 

Myth #2: Softened Water Removes Essential Minerals from Drinking Water

When you soften your home’s water, you are removing minerals. We won’t argue with that. Sometimes, homeowners are concerned about removing essential minerals from their water and even ask about “remineralizing” softened water. 

Here’s the scoop — while calcium and magnesium are essential for human health, they are found in many common food sources, such as dairy, nuts and seeds, whole grains, leafy vegetables, etc. The amounts of calcium and magnesium found in hard water (or artificially remineralized water) make up a meager percentage of a person’s daily intake of minerals. If your number one goal is to maintain optimum health, it’s wise to balance consuming lots of fresh, purified water alongside a rich and varied diet. 

In addition, while calcium and magnesium are essential for human health, they are terrible for your pipes. Softening your home’s water by removing these excess minerals will save your pipes, plumbing, fixtures – and sanity. Crusty hard water buildup is annoying to constantly clean and can cause extensive damage to your appliances, pipes, and plumbing.  

Myth #3: Softened Water Leaves Behind a “Slippery” Film 

Some homeowners report hard water feeling “slippery.” We often hear this feedback from our customers who have a whole-home softening system and are bathing in softened water for the first time. The water feels different! 

When you bathe in hard water, excess mineral film is left behind on your skin and hair. Picture the white spots on your drinking glasses when you have hard water. The same process is happening to your body after a shower! 

When you have softened water, there’s no “film” left behind. Softened water allows soap to lather correctly and lift away dirt and oil from your body. Then, it all rinses off, leaving behind truly clean skin and hair. While this “squeaky clean” feeling may feel different, rest assured, there’s no true slime or film left behind. Just plain, pure water working as it should. 

Myth #4: Water Softeners Can Damage Your Pipes 

Water is powerful! When water is soft, or lacking in excess minerals, it can sometimes try to pull in minerals towards itself. If a home’s water source is naturally soft, homeowners can experience pipe corrosion because of the water’s naturally low pH level. Naturally softened water can pull minerals out of copper pipes, creating weak spots and leaks. 

This can create the idea that softened water is inherently for your plumbing. It’s important to know that professionally installed water softening systems are balanced for optimum pH levels. If you go with a reputable water treatment company, like Wolverine Water, you’ll receive professional service that will accurately balance your water’s pH level and protect your home’s plumbing from corrosion. Plus, ignoring your home’s hard water problem will cause even more damage to your plumbing in the long run. 

Myth#5: Water Softeners Are Difficult to Maintain 

If you’ve conducted a Google search to see if water softeners are right for your home, you’ve likely come across some discussion boards about their maintenance and care. Unfortunately, these often include many worst-case scenarios. However, this isn’t a typical experience for our customers. 

When you have a unit professionally installed and you use high-quality softening salts and products, your system should run smoothly for decades. If you are similar to the average home, you use 400 gallons of water each day for flushing toilets, bathing, running water-based appliances, washing dishes, drinking, cooking, etc. When you consider all the ways that water powers your home, it puts a few minutes of maintenance into perspective.

Plus, if you do run into issues with your unit, we’re here to help! We offer free maintenance for the entire first year after installation and provide fast, efficient service on Wolverine Water systems and other companies’ units. If you are experiencing any issues with your whole-home water purification system, contact us, and we can help you enjoy pure, softened water again.

Still Have More Questions? 

Contact our team today. We’re happy to answer any of your questions about our water purification systems.

Share this :

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Sign up our newsletter to get update information, news and free insight.